C U R R I C U L U M V I T A E
Ljubisa D. Andric
Organizational Units:
Sector for Mineral Processing and Inorganic Technologies
Profile/Educational Data:
Doctor of Technical Sciences, and Associate Professor
Diplom thesis:
''Fortifying parameters of the flotation concentration of monomineral ores of antimone from Kik-Stolice'',University of Belgrade, Faculty of Mining and Geology, Mineral Processing Department, Belgrade, 1984
MS thesis:
''Investigation of kinetics of dry micronization of mica in ultra-centrifugal mille with a perfipheral comminution path''University of Belgrade, Faculty of Mining and Geology,Mineral Processing Department, Belgrade, 1993.
PhD thesis:
''Mechanochemical activation of alumina and its influences on change of the alumina crystal structure'' University of Belgrade, Center for Multidisciplinary Studies (CMS), 1999.
Current Position:
Principal Research Fellow Institute for Technology of Nuclear and Other Mineral Raw Materials, Belgrade, Associate Professor, Technical faculty in Bor, University of Belgrade
ACADEMIC CAREER:
Employment:
Institute for Technology of Nuclear and Other Mineral Raw Materials, 1986.
Position:
Younger professional assistant 1986.
Professional assistant 1987.
Higher professional assistant 1991.
Research assistant 1992
Assistant, 1993-1999.
Senior Research Associate, 1999-2004.
Chief of the Mineral Processing Department 2001-2004.
Principal Research Fellow 2004.-Present
Chief of the Sector for Mineral Processing
and Inorganic Technologies 2009.-Present
Associate Professor 2009.-Present
Scope of Research:
Kinetics and mechanisms of fine and ultra-fine dry micronizing materials mill;
Phenomenons of mechanical and mechanochemical activation of materials;
Separation processes in processing of mineral raw materials and their complex and rational usage in technology of the new materials.
The leadership and participation in projects
Ljubiša Andrić, project manager 19033, Technological Development: Defining the optimal technological and technical parameters of manufacturing ultra-fine powders mikronizing, Ministry of science and tehnological development, of Republic of Serbia, 2008-2011.
Ljubiša Andrić, project manager 6722, Technological Development: Development of production technology and powder fillers in various industries’’ Ministry of science and tehnological development, of Republic of Serbia, 2004-2006.
Ljubiša Andrić, project manager; MHT.2.06.0051.B: “Development and production of materials for application in metallurgy, construction engineering and machinery production”, Ministry of science, technology and development of Republic of Serbia (2002-2004)
Ljubiša Andrić, project manager; 401-00-383/178/2001-10: “Mobile plants for recycling of waste construction materials”, Ministry of science, technology and development of Republic of Serbia (2001)
Ljubiša Andrić, project manager; 401-00-383/178-I/2001-10: “Procedures and devices for waste material recycling”, Ministry of health and environmental protection of Republic of Serbia (2001)
Studies
Technical dovcumentation for reconstruction of technological line for micronization and classification of white minerals ¨Venčac¨, ITNMS-Belgrade, 1999.
Technical documentation and economical evaluation of the recycling plant for construction material, ITNMS- Belgrade, 1999.
Determinatin of optimal technological and technical parameters for micronization of mica from Feldspat-Bujanovac plant, ITNMS- Belgrade, 2000.
Feasibility study for micronization plant for mica from flotation plant ¨Feldpat-Bujanovac¨, ITNMS-Belgrade, 2000.
Feasibility study for the recycling plant for the waste construction material, ITNMSBeograd, 2000.
Refereed papers
Scientific books and monographs
Božidar Branković, Ljubiša Andrić: ''Mobile plant for recycling construction waste materials '', ITNMS and Ministry of health and environmental protection of Republic Serbia, ISBN 86-82867-10-7, 2002.
Ljubiša Andrić: ''Mica-Processing-Application'' ITNMS, Ministry of science and technology of Serbia, ISBN 86-82867-19-2, Belgrade 2006.
Ljubiša Andrić, Siniša Milošević:¨ Domestic Nonmetallic Mineral Raw Materials for Commercial Use ”Chapter in Monograph: ¨ Quality and technical conditions for the use of raw nonmetallic materials ¨, ITNMS, ISBN 86-82867-09-5, Belgrade, 1998., s.50-58.
Milan Petrov, Ljubiša Andrić, Siniša Milošević:“Mechanochemical activation in valorization of valuable components from the mineral raw materials and wastes”, Chapter in Monograph ‘’Recycling of wastes and secondary raw materials in environmental protection’’, Belgrade, 1995., s.137-145.
Milan Petrov, Siniša Milošević, Ljubiša Andrić: Controlled mechanical activation of disperse materials '' Serbian Academy of Sciences and Arts, Scientific Meetings, Volume CVI, Department of Technical Sciences, Book 4, Sintering Theory and technology (40 Years of the Belgrade School of Sintering), Procedings of the Scientific Meeting held on April 16-17, 2003, Accepted at the Meeting of the Department of Technical Sciences, May 13, 2003., Editor Academician Momčilo M. Ristić, Belgrade 2004., ISBN 86-7025-361-5, p.105-116.
Papers published in international journals
Ljubiša Andrić, Deana Živanović, Siniša Milošević: Change of the physical characteristics of the materials by mechanical activation” Advance Science and Technology of Sintering, (1999) 187-192. (ISBN 0-306-46180-3)
Ljubiša Andrić, Ljubica Pavlović, Siniša Milošević, Milan Petrov, Sanja Martinović: ¨Theoretical Principles of Mechanochemical Activation During the Operation of High-Energy Mechanoactivators¨, Powder Metallurgy Science & Technology Briefs, 3 (2001) 11-17.
Ljubiša Andrić, Ljubica Pavlović, Siniša Milošević, Milan Petrov, Sanja Martinović: ¨The Change of Alumina Crystal Structure by Mechanochemical Activation¨, Part I, Powder Metallurgy Science & Technology Briefs, 4 (2002) 10-12.
Ljubiša Andrić, Ljubica Pavlović, Siniša Milošević, Milan Petrov, Sanja Martinović:¨The Change of Alumina Crystal Structure by Mechanochemical Activation¨, Part II, Powder Metallurgy Science & Technology Briefs, 4 (2002) 21-26
Zagorka Aćimović, Ljubica Pavlović, Ljiljana Trumbulović, Ljubiša Andrić, Milan Stamatović, ¨Synthesis and Caracterization of the Cordierite Ceramics from Non-Standard Raw Materials for Application in Foundry¨, Materials Letters 57 (2003) 2651-2656. (ISSN 0167-577X)
Ljiljana Trumbulović, Zagorka Aćimović, Zvonko Gulišija, Ljubiša Andrić, ''Correlation of Technological Parameters and Quality of Castings Obtained by the EPC Method'', Materials Letters 58 (2004) 1726-1731. (ISSN 0167-577X)
Milutin R. Đuričić, Zagorka S. Aćimović-Pavlović, Ljubiša D. Andrić, ‘’The Correlation Of Technological Parameters And The Structure Of Cold Sintered Iron As A Basis For Material Property Prognosis’’, Materials Letters 60 (2006) 3390-3393. (ISSN 0167-577X)
Papers published in national journals
Ljiljana Trumbulović, Zvonko Gulišija, Zagorka Aćimović-Pavlović, Ljubiša Andrić: “Influence of the Cordierite Lining on the Lost Foam Casting Process Journal of Mining and Metallurgy, 39 (3-4) B (2003) (ISSN 1450-5959)
Ljubiša Andrić, Milan Petrov, Vladan Milošević, Slavica Mihajlović: ''Operating technique of mills in the process of micronization milling of alumina'', Journal of Mining and Mateallurgy, 41 (1-4)A (2005) 27-43. (ISSN 1450-5959)
Zagorka S. Aćimović-Pavlović, Aurel K. Prstić, Ljubiša Andrić: ''Cordierite ceramics for the application in foundry practice'', Chemical Industry, 61 (2007) 39-43. (ISSN 0354-7531)
Zagorka S. Aćimović-Pavlović, Aurel K. Prstić, Ljubiša Andrić: ''The characterization of talc based coating for the application in foundry'', Chemical Industry & Chemical Engineering Quarterly (CI&CEQ), 13 (2007)38-40. (ISSN 1451-9372)
International meetings
Ljubiša Andrić, Milan Petrov, Gordana Stefanović, Zagorka Aćimović Pavlović, Aurel Prstić: ¨Perspectives of dry micronized milling of application ¨jet-mill¨ in production of non-metalic raw materials¨, X Balkan Mineral Processing Congress, ISBN-954-9748-54-5, Varna, 15-20 june, Bulgaria, 2003., p.70-75.
Ljubiša Andrić, Siniša Milošević, Gordana Stefanović, Ljubica Čojbašić, Zagorka Aćimović-Pavlović: ¨Application ¨Jet-mill¨ in production of micronized fillers¨, 2004 International Conference on Powder Metallurgy and parti- culate Materials, 13-17 June 2004., Chicago, USA, Part 2, p.1-7.
Ljubiša Andrić, Milan Petrov, Slavica Mihajlović, Vladan Milošević: Micronized Milling of Non-Metalic Raw Materials in Mills New Construction, International Mineral Procesing Congress, Istanbul-Turkey, 3-8 September 2006., Volume I, ISBN 975-7946-27-3 (Tk), p.62-69
Ljubiša Andrić, Vladan Milošević, Milan Petrov, Ivana Ilić: ''Comparative data Analysis of Dry Micronizing Mica Milling in Vibro and Ultra-Centrifugal Mill'', ''2007 International Conference on Powder Metallurgy and Particulate Materials'', Session: Materials/Properties , ISBN:1-878954-96-2, Denver 13-16 May, USA, 2007., Part: B7.
Ljubiša Andrić, Nadežda Ćalić, Dušan Salatić, Siniša Milošević: ''Teoretical Principles of Mechanical Activation During Processes in New Construction Mills'', XXIV International Mineral Processing Congress, 24-28 Septembar, 2008., Beijing, Kina, ISBN 978-7-03-022711-9, p.609-617.
Membership Data:
Secretary of Yugoslavia Commity for Mineral Processing, 1995/97
President of Serbia and Montenegro Commity for Mineral Processing, 2002/04
Vice President of Serbia and Montenegro Commity for Mineral Processing, 2004/06
Secretary of Scientifically Councel in ITNMS, 1994/98
Vice President of Scientifically Councel in ITNMS, 2002/06.
Corresponding member: Balkan Academy of Sciences for Mineral Technology, (BASMT), 2006
Corresponding member: Academy of Engineering Sciences (AINS), of Serbia, 2007
Vice President of Serbia Commity for Mineral Processing, 2006/08
Foreing languages:
English.
Contact:
tel. (+381 11) 3691722
Mob. (+381 11) 63 438 249
fax. (+381 11) 3691583
e-mail: lj.andric@itnms.ac.rs